6-100 - Key, with recess for logo - Dirak

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		204-0107.00-00000	204-0107.00-00000	A	Double bit key	Double bit 3mm Pin	-	10
		204-0108.00-00000	204-0108.00-00000	A	Double bit key	Double bit 5mm Pin	-	10
		204-0102.00-00000	204-0102.00-00000	B	Wrenches	Square 7mm	14.2	10
		204-0103.00-00000	204-0103.00-00000	B	Wrenches	Square 8mm	14.2	10
		204-0104.00-00000	204-0104.00-00000	B	Wrenches	Triangular 7mm	14.2	10
		204-0105.00-00000	204-0105.00-00000	B	Wrenches	Triangular 8mm	14.2	10
		204-0106.00-00000	204-0106.00-00000	B	Wrenches	Triangular 6.5mm CNOMO	14.2	10
		204-0109.00-00000	204-0109.00-00000	B	Wrenches	Daimler Benz type	11.5	10
		204-0110.00-00000	204-0110.00-00000	B	Wrenches	Crown type key	15.9	10
		204-0111.00-00000	204-0111.00-00000	B	Wrenches	Square 6mm	11.5	10
		204-0112.00-00000	204-0112.00-00000	B	Wrenches	Triangular 6.5mm	11.5	10
		204-0113.00-00000	204-0113.00-00000	B	Wrenches	Triangular 9mm EDF	15.9	10
		204-0116.00-00000	204-0116.00-00000	B	Wrenches	Crescent (Czech)	15.9	10
		204-0117.00-00000	204-0117.00-00000	B	Wrenches	Round mandrel with notch ...	14.2	10
		204-0119.00-00000	204-0119.00-00000	B	Male key	Male square 6mm	-	10
		204-0120.00-00000	204-0120.00-00000	B	Male key	Male square 7mm	-	10
		204-0121.00-00000	204-0121.00-00000	B	Male key	Male square 8mm	-	10
		204-0133.30-00000	204-0133.30-00000	B	Male key	Male hex. 8mm (5/16")	-	10
		204-0134.30-00000	204-0134.30-00000	B	Wrenches	Hex. 7/16"	15.6	10
		204-0139.00-00000	204-0139.00-00000	B	Wrenches	Hex. 10mm	15.9	10
		204-0501.00-00000	204-0501.00-00000	C	Wrenches	Square 6mm	-	10
		204-0502.00-00000	204-0502.00-00000	C	Wrenches	Triangular 6.5mm	-	10
		204-0407.03-00000	204-0407.03-00000	D	Double bit key	Double bit 3mm Pin	-	10
		204-0408.03-00000	204-0408.03-00000	D	Double bit key	Double bit 5mm Pin	-	10
		204-0401.03-00000	204-0401.03-00000	E	Hollow key, (logo both si...	Square 6mm	11.5	10

Additional Information

Users who viewed this, were also interested in

1-102 - CamsDirak 15.12.2023

1-100 - Quarter-Turn, Screw-in Type, Optional: Water- and dust-tight according to IP65

1-100 - Quarter-Turn, Screw-in Type, Optional: Water- and dust-tight accord...Dirak 15.12.2023

1-130 - Wing Handle Zinc Die or PA, Screw-in type

1-130 - Wing Handle Zinc Die or PA, Screw-in typeDirak 15.12.2023

1-101 - Inserts Pr20.1

1-101 - Inserts Pr20.1Dirak 15.12.2023

1-058 - CamsDirak 15.12.2023

1-170 - Round Rod with Eye

1-170 - Round Rod with EyeDirak 15.12.2023

1-050 - Quarter-Turn, Screw-in, small version

1-050 - Quarter-Turn, Screw-in, small versionDirak 15.12.2023

1-150 - L-Handle IP65, Screw-in type

1-150 - L-Handle IP65, Screw-in typeDirak 15.12.2023

7-080 - Quarter-Turn Pr20.1 L18-60

7-080 - Quarter-Turn Pr20.1 L18-60Dirak 15.12.2023

6-180 - Cover stay

6-180 - Cover stayDirak 15.12.2023

6-101 - Multi Key

6-101 - Multi KeyDirak 15.12.2023

3-101 - Escutcheons and Inserts

3-101 - Escutcheons and InsertsDirak 15.12.2023

1-270.01 - Finger Pull Pr20.1

1-270.01 - Finger Pull Pr20.1Dirak 15.12.2023

7-030 - Rod-Latch,for cutout version A 50x25mm stainless steel

7-030 - Rod-Latch,for cutout version A 50x25mm stainless steelDirak 15.12.2023