NH - JTEKT Corporation(Koyo)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R Radius [mm]	R1 Radius (Min.) ⁿ/ₐ	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	C Width of outer ring [mm]	NG Limiting speeds(Grease) [rpm]	NO Limiting speeds(Oil) [rpm]

		NH204R	20	47	17	1.0	0.6	NH204R	32.2	22.6	3.05	14	15000	18000
		NH2204	20	47	21	1.0	0.6	NH2204	27.8	18.4	2.70	18	13000	18000
		NH2204R	20	47	21	1.0	0.6	NH2204R	38.3	28.3	3.60	18	13000	18000
		NH304R	20	52	19	1.1	0.6	NH304R	39.4	26.9	3.75	15	12000	16000
		NH2304	20	52	25	1.1	0.6	NH2304	38.0	30.2	3.60	21	11000	16000
		NH2304R	20	52	25	1.1	0.6	NH2304R	52.5	38.8	5.40	21	11000	16000
		NH205R	25	52	18	1.0	0.6	NH205R	36.7	27.7	3.75	15	13000	15000
		NH2205	25	52	21	1.0	0.6	NH2205	29.6	22.8	3.05	18	12000	16000
		NH2205R	25	52	21	1.0	0.6	NH2205R	43.6	34.6	4.40	18	12000	15000
		NH305R	25	62	21	1.1	1.1	NH305R	51.9	37.4	4.85	17	10000	14000
		NH2305	25	62	28	1.1	1.1	NH2305	53.4	40.9	5.70	24	9100	14000
		NH2305R	25	62	28	1.1	1.1	NH2305R	71.2	56.1	7.50	24	9100	14000
		NH206R	30	62	20	1.0	0.6	NH206R	48.9	37.4	5.25	16	11000	13000
		NH2206	30	62	24	1.0	0.6	NH2206	41.0	33.1	4.20	20	9800	13000
		NH2206R	30	62	24	1.0	0.6	NH2206R	61.2	49.8	6.80	20	9700	13000
		NH306R	30	72	24	1.1	1.1	NH306R	66.5	50.2	6.80	19	8700	12000
		NH2306	30	72	32	1.1	1.1	NH2306	64.3	50.8	7.15	27	7700	12000
		NH2306R	30	72	32	1.1	1.1	NH2306R	93.3	77.6	10.1	27	7800	12000
		NH406	30	90	30	1.5	1.5	NH406	78.3	55.0	7.95	23	7600	10000
		NH207R	35	72	21	1.1	0.6	NH207R	62.9	50.2	6.55	17	9300	11000
		NH2207	35	72	27	1.1	0.6	NH2207	61.3	51.2	7.15	23	8500	11000
		NH2207R	35	72	27	1.1	0.6	NH2207R	77.1	65.3	9.20	23	8300	11000
		NH307R	35	80	27	1.5	1.1	NH307R	83.3	65.4	9.35	21	7700	10000
		NH2307	35	80	37	1.5	1.1	NH2307	75.5	65.7	7.95	31	7000	10000
		NH2307R	35	80	37	1.5	1.1	NH2307R	116	101	15.0	31	6900	10000

Additional Information

Users who viewed this, were also interested in

JTEKT Corporation(Koyo)

With flat back faces

With flat back facesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

NJJTEKT Corporation(Koyo) 05.06.2019

JTEKT Corporation(Koyo)

NFJTEKT Corporation(Koyo) 05.06.2019

NTN Corporation

Type NUNTN Corporation 17.10.2023

JTEKT Corporation(Koyo)

NN Cylindrical bore

NN Cylindrical boreJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

NNU Cylindrical bore

NNU Cylindrical boreJTEKT Corporation(Koyo) 16.01.2019

33052 - Extensions for probe inserts

33052 - Extensions for probe insertsnorelem 30.04.2024

09063 - Magnets deep pot with pin AlNiCo

09063 - Magnets deep pot with pin AlNiConorelem 30.04.2024

09060 - Magnets permanent for workholding with fine pole division

09060 - Magnets permanent for workholding with fine pole divisionnorelem 30.04.2024

28060 - Dipsticks

28060 - Dipsticksnorelem 30.04.2024

33022 - Probe with flat point

33022 - Probe with flat pointnorelem 30.04.2024

28058 - Vent screws with check valve and dipstick

28058 - Vent screws with check valve and dipsticknorelem 30.04.2024

28010 - Oil level sight glasses aluminium

28010 - Oil level sight glasses aluminiumnorelem 30.04.2024

JTEKT Corporation(Koyo)

NNU Tapered bore

NNU Tapered boreJTEKT Corporation(Koyo) 16.01.2019