NN Cylindrical bore - JTEKT Corporation(Koyo)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	SERIES ⁿ/ₐ	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R Radius [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	NG Limiting speeds (Grease) [rpm]	NO Limiting speeds (Oil) [rpm]

		NN3005	CD	25	47	16	0.6	NN3005	32.2	30.0	5.20	14000	17000
		NN3006	CD	30	55	19	1.0	NN3006	46.0	44.1	4.95	12000	14000
		NN3007	CD	35	62	20	1.0	NN3007	49.1	50.0	5.65	10000	12000
		NN3008	CD	40	68	21	1.0	NN3008	52.0	55.9	6.35	9100	11000
		NN3009	CD	45	75	23	1.0	NN3009	67.1	71.9	8.75	8300	9900
		NN3010	CD	50	80	23	1.0	NN3010	66.4	72.6	8.85	7600	9100
		NN3011	CD	55	90	26	1.1	NN3011	89.6	101	13.2	6800	8200
		NN3012	CD	60	95	26	1.1	NN3012	91.6	106	13.9	6400	7700
		NN3013	CD	65	100	26	1.1	NN3013	93.6	111	14.6	6000	7200
		NN3014	CD	70	110	30	1.1	NN3014	122	148	20.6	5500	6500
		NN3015	CD	75	115	30	1.1	NN3015	124	155	21.5	5200	6200
		NN3016	CD	80	125	34	1.1	NN3016	149	186	26.6	4800	5800
		NN3017	CD	85	130	34	1.1	NN3017	152	194	27.3	4600	5500
		NN3018	CD	90	140	37	1.5	NN3018	179	228	29.3	4200	5100
		NN3019	CD	95	145	37	1.5	NN3019	188	246	31.3	4100	4900
		NN3020	CD	100	150	37	1.5	NN3020	157	265	33.3	3900	4700
		NN3021	CD	105	160	41	2.0	NN3021	197	322	42.5	3700	4400
		NN3022	CD	110	170	45	2.0	NN3022	221	361	47.9	3500	4200
		NN3024	CD	120	180	46	2.0	NN3024	232	392	51.1	3200	3900
		NN3026	CD	130	200	52	2.0	NN3026	283	476	57.7	2900	3500
		NN3028	CD	140	210	53	2.0	NN3028	297	516	61.5	2700	3300
		NN3030	CD	150	225	56	2.1	NN3030	334	587	70.1	2500	3000
		NN3032	CD	160	240	60	2.1	NN3032	398	695	79.6	2400	2800
		NN3034	CD	170	260	67	2.1	NN3034	471	824	105	2200	2600
		NN3036	CD	180	280	74	2.1	NN3036	561	958	118	2000	2400

Additional Information

Users who viewed this, were also interested in

JTEKT Corporation(Koyo)

NN Tapered bore

NN Tapered boreJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

NNU Cylindrical bore

NNU Cylindrical boreJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

NNU Tapered bore

NNU Tapered boreJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

TDI typeJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open typeJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With flat back faces

With flat back facesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

NFJTEKT Corporation(Koyo) 05.06.2019

31150 - Joint blocks

31150 - Joint blocksnorelem 30.04.2024

28058 - Vent screws with check valve and dipstick

28058 - Vent screws with check valve and dipsticknorelem 30.04.2024

33072 - Deflection dial gauge holders 90° probe lever with thread

33072 - Deflection dial gauge holders 90° probe lever with threadnorelem 30.04.2024

09063 - Magnets deep pot with pin AlNiCo

09063 - Magnets deep pot with pin AlNiConorelem 30.04.2024

31156 - Clamping joints

31156 - Clamping jointsnorelem 30.04.2024

33182 - Spring mounted centre sleeves with lifting cam

33182 - Spring mounted centre sleeves with lifting camnorelem 30.04.2024

33010 - Dial gauge holders sliding

33010 - Dial gauge holders slidingnorelem 30.04.2024