SWI - Pinions - HepcoMotion

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9

		LINA Bill of material	CNSORDERNO Order number ⁿ/ₐ	DESC Description ⁿ/ₐ	USE1 For Use Width... ⁿ/ₐ	USE2 For Use Width... ⁿ/ₐ	USE3 For Use Width... ⁿ/ₐ	USE4 For Use Width... ⁿ/ₐ	CON Condition ⁿ/ₐ	IG ISO 1328 Grade ⁿ/ₐ	T No. of Teeth ⁿ/ₐ	MOD Module [mm]	A Diameter (Pitch Circle) [mm]	B Diameter [mm]	C Diameter [mm]	D Height [mm]	E Width [mm]	F Length [mm]	G Length [mm]	H Diameter [mm]	I Length [mm]	L Thread ⁿ/ₐ	CNSMAT Material ⁿ/ₐ	CNSMASSEXACT Weight [g]

		SS P04 W3.5 T42 B	SS P04 W3.5 T42 B	Mod 0.4 Pinion	R12	-	-	-	Teeth unhardened and ungr...	10	42	0.40	16.8	0	5	0.0	0	10.0	3.5	10	3.00	M3	SS	10
		SS P07 W9 T28 B	SS P07 W9 T28 B	Mod 0.7 Pinion	-	-	REV, RIV	-	Teeth unhardened and ungr...	10	28	0.70	19.6	21	5	0.0	0	17.0	9.0	16	4.00	M3	SS	31
		SS P08 W4 T48 B	SS P08 W4 T48 B	Mod 0.8 Pinion	R20	-	-	-	Teeth unhardened and ungr...	10	48	0.80	38.4	40	12	1.8	4	12.0	4.0	26	4.00	M3	SS	50
		SS P08 W6 T48 B	SS P08 W6 T48 B	Mod 0.8 Pinion	R25	RD25	-	-	Teeth unhardened and ungr...	10	48	0.80	38.4	40	12	1.8	4	14.0	6.0	26	4.00	M3	SS	75
		P10 W11 T42 B	P10 W11 T42 B	Mod 1 Pinion	-	-	RES, RIS	TNSE	Teeth hardened and ground...	6	42	1.00	42.0	44	15	2.3	5	23.0	11.0	30	6.00	M4	ST / SS	160
		P10 W7 T48 B	P10 W7 T48 B	Mod 1 Pinion	R44	RD44	-	-	Teeth hardened and ground...	6	48	1.00	48.0	50	15	2.3	5	18.5	7.0	27	5.75	M4	ST / SS	170
		P125 W14 T34 B	P125 W14 T34 B	Mod 1.25 Pinion	-	-	REM, RIM	TNME	Teeth hardened and ground...	6	34	1.25	42.5	45	15	2.3	5	25.5	14.0	30	5.75	M4	ST / SS	200
		P15 W12 T48 B	P15 W12 T48 B	Mod 1.5 Pinion	R76	-	-	-	Teeth hardened and ground...	6	48	1.50	72.0	75	15	2.3	5	25.0	12.0	30	6.50	M4	ST / SS	350
		P20 W20 T27 B	P20 W20 T27 B	Mod 2 Pinion	-	-	REL, RIL	-	Teeth hardened and ground...	6	27	2.00	54.0	58	20	2.8	6	35.0	20.0	40	7.50	M5	ST / SS	430

Additional Information

Users who viewed this, were also interested in