SL Ø 35 - Light load - RCM

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15

		LINA Bill of material	CODE - ⁿ/ₐ	DO Hole diameter [mm]	DI Rod diameter [mm]	LO Free length [mm]	RG Rate /±10% [N/mm]	FX Force [N]	LX Length at compression end [mm]	S1 Recommended working deflection for long spring life [mm]	F1 Force [N]	S2 Recommended working deflection for medium spring life [mm]	F2 Force [N]	SN Maximum operating deflection [mm]	FN Force [N]	SB Solid deflection [mm]	MAT Material ⁿ/ₐ	BXH Cross wire section [mm]	DE Approx. spring outside diameter ⁿ/ₐ	H [mm]

		SL35-040	SL35-040	35.0	17.5	40	101.1	0.000	40.000	12.8	1295	14.4	1461	16.0	1618	19.2	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-045	SL35-045	35.0	17.5	45	89.9	0.000	45.000	14.4	1295	16.2	1461	18.0	1618	21.6	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-050	SL35-050	35.0	17.5	50	80.9	0.000	50.000	16.0	1295	18.0	1461	20.0	1618	24.0	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-055	SL35-055	35.0	17.5	55	73.5	0.000	55.000	17.6	1295	19.8	1461	22.0	1618	26.4	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-060	SL35-060	35.0	17.5	60	67.3	0.000	60.000	19.2	1295	21.6	1461	24.0	1618	28.8	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-065	SL35-065	35.0	17.5	65	62.3	0.000	65.000	20.8	1295	23.4	1461	26.0	1618	31.2	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-070	SL35-070	35.0	17.5	70	57.8	0.000	70.000	22.4	1295	25.2	1461	28.0	1618	33.6	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-075	SL35-075	35.0	17.5	75	53.9	0.000	75.000	24.0	1295	27.0	1461	30.0	1618	36.0	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-080	SL35-080	35.0	17.5	80	50.5	0.000	80.000	25.6	1295	28.8	1461	32.0	1618	38.4	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-090	SL35-090	35.0	17.5	90	44.9	0.000	90.000	28.8	1295	32.4	1461	36.0	1618	43.2	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-100	SL35-100	35.0	17.5	100	40.4	0.000	100.000	32.0	1295	36.0	1461	40.0	1618	48.0	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-125	SL35-125	35.0	17.5	125	32.4	0.000	125.000	40.0	1295	45.0	1461	50.0	1618	60.0	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-150	SL35-150	35.0	17.5	150	27.0	0.000	150.000	48.0	1295	54.0	1461	60.0	1618	72.0	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-175	SL35-175	35.0	17.5	175	23.0	0.000	175.000	56.0	1295	63.0	1461	70.0	1618	84.0	Cr-Si	8,25 x 3,65	34.5	3.650
		SL35-200	SL35-200	35.0	17.5	200	20.2	0.000	200.000	64.0	1295	72.0	1461	80.0	1618	96.0	Cr-Si	8,25 x 3,65	34.5	3.650