C Series

English	日本語

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	CNSORDERNO Parts No. ⁿ/ₐ	ID Bushing Inner Diameter [mm]	IDH Recommended Housing Inner Diameter [mm]	IDT Recommended Housing I.D. Tolerance [mm]	SD Recommended Shaft Diameter [mm]	SDT Recommended Shaft Diameter Tolerance [mm]	IDB Bushing Inner Diameter [mm]	IDBT Bushing Inner Diameter Tolerance [mm]	OD Bushing Outer Diameter [mm]	ODT Bushing Outer Diameter Tolerance [mm]	L Bushing Length [mm]	LT Bushing Length Tolerance [mm]	COD Chamfer on O.D. [mm]	CID Chamfer on I.D. [mm]

GB-C0606	GB-C0606	6	10	H7(+0.015/0)	6	g6(-0.004/-0.012)	6	+0.028/+0.013	10	+0.021/+0.006	6	0/-0.3	C0.3	C0.3
GB-C0608	GB-C0608	6	10	H7(+0.015/0)	6	g6(-0.004/-0.012)	6	+0.028/+0.013	10	+0.021/+0.006	8	0/-0.3	C0.3	C0.3
GB-C0610	GB-C0610	6	10	H7(+0.015/0)	6	g6(-0.004/-0.012)	6	+0.028/+0.013	10	+0.021/+0.006	10	0/-0.3	C0.3	C0.3
GB-C0808	GB-C0808	8	14	H7(+0.018/0)	8	g6(-0.005/-0.014)	8	+0.028/+0.013	14	+0.021/+0.006	8	0/-0.3	C0.3	C0.3
GB-C0810	GB-C0810	8	14	H7(+0.018/0)	8	g6(-0.005/-0.014)	8	+0.028/+0.013	14	+0.021/+0.006	10	0/-0.3	C0.3	C0.3
GB-C0812	GB-C0812	8	14	H7(+0.018/0)	8	g6(-0.005/-0.014)	8	+0.028/+0.013	14	+0.021/+0.006	12	0/-0.3	C0.3	C0.3
GB-C0816	GB-C0816	8	14	H7(+0.018/0)	8	g6(-0.005/-0.014)	8	+0.028/+0.013	14	+0.021/+0.006	16	0/-0.3	C0.3	C0.3
GB-C1010	GB-C1010	10	16	H7(+0.018/0)	10	g6(-0.005/-0.014)	10	+0.034/+0.016	16	+0.021/+0.006	10	0/-0.3	C0.3	C0.3
GB-C1012	GB-C1012	10	16	H7(+0.018/0)	10	g6(-0.005/-0.014)	10	+0.034/+0.016	16	+0.021/+0.006	12	0/-0.3	C0.3	C0.3
GB-C1016	GB-C1016	10	16	H7(+0.018/0)	10	g6(-0.005/-0.014)	10	+0.034/+0.016	16	+0.021/+0.006	16	0/-0.3	C0.3	C0.3
GB-C1020	GB-C1020	10	16	H7(+0.018/0)	10	g6(-0.005/-0.014)	10	+0.034/+0.016	16	+0.021/+0.006	20	0/-0.3	C0.3	C0.3
GB-C1210	GB-C1210	12	18	H7(+0.018/0)	12	g6(-0.006/-0.017)	12	+0.034/+0.016	18	+0.021/+0.006	10	0/-0.3	C0.3	C0.3
GB-C1212	GB-C1212	12	18	H7(+0.018/0)	12	g6(-0.006/-0.017)	12	+0.034/+0.016	18	+0.021/+0.006	12	0/-0.3	C0.3	C0.3
GB-C1216	GB-C1216	12	18	H7(+0.018/0)	12	g6(-0.006/-0.017)	12	+0.034/+0.016	18	+0.021/+0.006	16	0/-0.3	C0.3	C0.3
GB-C1220	GB-C1220	12	18	H7(+0.018/0)	12	g6(-0.006/-0.017)	12	+0.034/+0.016	18	+0.021/+0.006	20	0/-0.3	C0.3	C0.3
GB-C1616	GB-C1616	16	22	H7(+0.021/0)	16	g6(-0.006/-0.017)	16	+0.034/+0.016	22	+0.021/+0.006	16	0/-0.3	C0.3	C0.3
GB-C1620	GB-C1620	16	22	H7(+0.021/0)	16	g6(-0.006/-0.017)	16	+0.034/+0.016	22	+0.021/+0.006	20	0/-0.3	C0.3	C0.3
GB-C1625	GB-C1625	16	22	H7(+0.021/0)	16	g6(-0.006/-0.017)	16	+0.034/+0.016	22	+0.021/+0.006	25	0/-0.3	C0.3	C0.3
GB-C2016	GB-C2016	20	30	H7(+0.021/0)	20	g6(-0.007/-0.020)	20	+0.041/+0.020	30	+0.021/+0.006	16	0/-0.3	C0.5	C0.5
GB-C2020	GB-C2020	20	30	H7(+0.021/0)	20	g6(-0.007/-0.020)	20	+0.041/+0.020	30	+0.021/+0.006	20	0/-0.3	C0.5	C0.5
GB-C2025	GB-C2025	20	30	H7(+0.021/0)	20	g6(-0.007/-0.020)	20	+0.041/+0.020	30	+0.021/+0.006	25	0/-0.3	C0.5	C0.5
GB-C2030	GB-C2030	20	30	H7(+0.021/0)	20	g6(-0.007/-0.020)	20	+0.041/+0.020	30	+0.021/+0.006	30	0/-0.3	C0.5	C0.5
GB-C2520	GB-C2520	25	35	H7(+0.025/0)	25	g6(-0.007/-0.020)	25	+0.041/+0.020	35	+0.025/+0.009	20	0/-0.3	C0.5	C0.5
GB-C2525	GB-C2525	25	35	H7(+0.025/0)	25	g6(-0.007/-0.020)	25	+0.041/+0.020	35	+0.025/+0.009	25	0/-0.3	C0.5	C0.5
GB-C2530	GB-C2530	25	35	H7(+0.025/0)	25	g6(-0.007/-0.020)	25	+0.041/+0.020	35	+0.025/+0.009	30	0/-0.3	C0.5	C0.5

Additional Information

No Third-party Cookies supported