iglidur® A200 - type S - inch sizes - igus

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19

		LINA Bill of material	ARTNR Part no. ⁿ/ₐ	BEZ Description ⁿ/ₐ	D1 Inside diameter [Inch]	D2 Outside diameter [Inch]	B1 Overall length [Inch]	F Chamfer [mm]	D1MAX Inside diameter max. [Inch]	D1MIN Inside diameter min. [Inch]	EBMAX Housing bore max. [Inch]	EBMIN Housing bore min. [Inch]	WELLEMAX Shaft size max. [Inch]	WELLEMIN Shaft size min. [Inch]

		ASI-0204-04	ASI-0204-04	iglidur® A200 type S, inc...	1/8	1/4	1/4	0.3	0.1280	0.1262	0.2515	0.2510	0.1250	0.1241
		ASI-0305-04	ASI-0305-04	iglidur® A200 type S, inc...	3/16	5/16	1/4	0.3	0.1905	0.1887	0.3140	0.3135	0.1875	0.1866
		ASI-0406-04	ASI-0406-04	iglidur® A200 type S, inc...	1/4	3/8	1/4	0.5	0.2539	0.2516	0.3765	0.3760	0.2500	0.2491
		ASI-0406-06	ASI-0406-06	iglidur® A200 type S, inc...	1/4	3/8	3/8	0.5	0.2539	0.2516	0.3765	0.3760	0.2500	0.2491
		ASI-0406-08	ASI-0406-08	iglidur® A200 type S, inc...	1/4	3/8	1/2	0.5	0.2539	0.2516	0.3765	0.3760	0.2500	0.2491
		ASI-0507-08	ASI-0507-08	iglidur® A200 type S, inc...	5/16	15/32	1/2	0.5	0.3164	0.3141	0.4390	0.4385	0.3125	0.3116
		ASI-0608-04	ASI-0608-04	iglidur® A200 type S, inc...	3/8	1/2	1/4	0.5	0.3789	0.3766	0.5015	0.5010	0.3750	0.3741
		ASI-0608-08	ASI-0608-08	iglidur® A200 type S, inc...	3/8	1/2	1/2	0.5	0.3789	0.3766	0.5015	0.5010	0.3750	0.3741
		ASI-0810-08	ASI-0810-08	iglidur® A200 type S, inc...	1/2	5/8	1/2	0.8	0.5047	0.5020	0.6260	0.6250	0.5000	0.4990
		ASI-0810-12	ASI-0810-12	iglidur® A200 type S, inc...	1/2	5/8	3/4	0.8	0.5047	0.5020	0.6260	0.6250	0.5000	0.4990
		ASI-1013-05	ASI-1013-05	iglidur® A200 type S, inc...	5/8	13/16	5/16	0.8	0.6297	0.6270	0.8135	0.8125	0.6250	0.6240
		ASI-1013-12	ASI-1013-12	iglidur® A200 type S, inc...	5/8	13/16	3/4	0.8	0.6297	0.6270	0.8135	0.8125	0.6250	0.6240
		ASI-1216-12	ASI-1216-12	iglidur® A200 type S, inc...	3/4	1	3/4	0.8	0.7559	0.7525	1.0010	1.0000	0.7500	0.7490
		ASI-1216-16	ASI-1216-16	iglidur® A200 type S, inc...	3/4	1	1	0.8	0.7559	0.7525	1.0010	1.0000	0.7500	0.7490
		ASI-1418-16	ASI-1418-16	iglidur® A200 type S, inc...	7/8	1 1/8	1	0.8	0.8809	0.8775	1.1260	1.1250	0.8750	0.8740
		ASI-1620-12	ASI-1620-12	iglidur® A200 type S, inc...	1	1 9/32	3/4	0.8	1.0059	1.0025	1.2510	1.2500	1.0000	0.9990
		ASI-1620-16	ASI-1620-16	iglidur® A200 type S, inc...	1	1 9/32	1	0.8	1.0059	1.0025	1.2510	1.2500	1.0000	0.9990
		ASI-2024-16	ASI-2024-16	iglidur® A200 type S, inc...	1 1/4	1 17/32	1	1.2	1.2600	1.2531	1.5005	1.4995	1.2500	1.2490
		ASI-2428-24	ASI-2428-24	iglidur® A200 type S, inc...	1 1/2	1 3/4	1 1/2	1.2	1.5100	1.5032	1.7505	1.7495	1.5000	1.4990

Additional Information

Users who viewed this, were also interested in

B-Lok®-MV - Expansion inserts, self locking

B-Lok®-MV - Expansion inserts, self lockingKerb-Konus 28.03.2024

iglidur® A200 - type F - metric sizes

iglidur® A200 - type F - metric sizesigus 19.01.2021

iglidur® M250 - type S - inch sizes

iglidur® M250 - type S - inch sizesigus 19.01.2021

iglidur® A290 - type F - metric sizes

iglidur® A290 - type F - metric sizesigus 19.01.2021

iglidur® Z - type F - metric sizes

iglidur® Z - type F - metric sizesigus 19.01.2021

iglidur® H4 - type F - metric sizes

iglidur® H4 - type F - metric sizesigus 19.01.2021

IKO (NIPPON THOMPSON CO.,LTD)

TU40S (Standard table)

TU40S (Standard table)IKO (NIPPON THOMPSON CO.,LTD) 18.07.2019

IKO (NIPPON THOMPSON CO.,LTD)

CTLH220MIKO (NIPPON THOMPSON CO.,LTD) 18.07.2019

NSK Rolling Bearing

Four-Point Contact Ball Bearings

Four-Point Contact Ball BearingsNSK Rolling Bearing 15.11.2023

NSK Rolling Bearing

Tapered BoreNSK Rolling Bearing 15.11.2023

iglidur® JATM/VATM

iglidur® JATM/VATMigus 19.01.2021

iglidur® Z - type S - metric sizes

iglidur® Z - type S - metric sizesigus 19.01.2021

IKO (NIPPON THOMPSON CO.,LTD)

Thrust Washer (AS)

Thrust Washer (AS)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020

IKO (NIPPON THOMPSON CO.,LTD)

AM40-30IKO (NIPPON THOMPSON CO.,LTD) 18.07.2019