EH 23340. - Centering Clamping Elements, with clamping segments - Halder

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10

		LINA Bill of material	BESTNR Ref. No. ⁿ/ₐ	D1 min. [mm]	D2 max. [mm]	D3 g6 [mm]	D4 Thread ⁿ/ₐ	D5 +0.3 [mm]	D6 Locating hole H7 [mm]	H1 [mm]	H2 [mm]	H3 [mm]	H4 [mm]	H5 [mm]	L1 ±0.1 [mm]	L2 [mm]	N Number of segments [mm]	T [mm]	S Stroke [mm]	SW1 [mm]	SW2 [mm]	SK Clamping force F - max. [kN]	AM Tightening torque M max. [Nm]	F Clamping force max. [kN]	G Weight [g]

		23340.0014 Centering Clam...	23340.0014	14.5	18.5	12	M 4	2.0	12	14.3	9.8	8.6	5.5	19.3	4.5	3	3	6	2.3	3	5	3.5	5	3.5	19
		23340.0018 Centering Clam...	23340.0018	18.5	22.5	15	M 5	2.5	15	16.6	11.5	10.4	7.5	22.8	5.5	3	3	7	2.3	4	5	4.5	10	4.5	38
		23340.0022 Centering Clam...	23340.0022	22.5	26.5	20	M 6	3.0	20	19.7	14.1	13.0	6.0	28.7	7.0	3	3	8	2.3	5	6	5.0	17	5.0	62
		23340.0026 Centering Clam...	23340.0026	26.5	30.5	20	M 6	3.0	20	19.9	14.2	13.0	6.0	28.9	7.0	3	3	8	2.3	5	6	5.0	17	5.0	87
		23340.0030 Centering Clam...	23340.0030	30.5	38.5	25	M 6	4.0	25	23.2	14.0	11.7	7.0	32.2	9.0	6	3	8	4.6	5	6	5.0	17	5.0	133
		23340.0038 Centering Clam...	23340.0038	38.5	46.5	30	M 8	4.0	30	27.2	18.0	15.5	7.5	39.2	11.0	6	6	10	4.6	6	8	6.5	43	6.5	238
		23340.0046 Centering Clam...	23340.0046	46.5	54.5	30	M 8	4.0	30	27.2	18.0	15.7	7.5	39.2	11.0	6	6	10	4.6	6	8	6.5	43	6.5	327
		23340.0054 Centering Clam...	23340.0054	54.5	70.5	45	M10	5.0	45	40.7	23.7	19.1	9.0	54.7	15.0	12	6	12	9.2	8	10	8.0	79	8.0	658
		23340.0070 Centering Clam...	23340.0070	70.5	86.5	60	M12	5.0	60	46.0	28.3	23.6	10.0	63.0	17.0	12	6	15	9.2	10	12	10.0	141	10.0	1286
		23340.0086 Centering Clam...	23340.0086	86.5	102.5	60	M16	5.0	60	51.1	30.3	25.6	10.0	72.1	25.0	12	6	15	9.2	14	17	10.0	354	10.0	1778

Additional Information

Users who viewed this, were also interested in

EH 23340. - Centering Clamping Mandrels

EH 23340. - Centering Clamping MandrelsHalder 22.12.2022

EH 23310. - Down-Thrust Clamps with Eccentric Clamping Lever

EH 23310. - Down-Thrust Clamps with Eccentric Clamping LeverHalder 22.12.2022

EH 1116. - Stops

EH 1116. - StopsHalder 15.11.2022

EH 23700. - Clamping Element Systems

EH 23700. - Clamping Element SystemsHalder 22.12.2022

High Temperature Insulator Sheets - for Plastics Molds and Die Cast Dies

High Temperature Insulator Sheets - for Plastics Molds and Die Cast DiesD-M-E 24.05.2024

Slide Retainers

Slide RetainersD-M-E 24.05.2024

EH 23100 - Drive Blocks, DIN 2079 for spindle heads no. 30 to 50, form C

EH 23100 - Drive Blocks, DIN 2079 for spindle heads no. 30 to 50, form CHalder 22.12.2022

EH 1653. - Positioning Clamping Cylinders

EH 1653. - Positioning Clamping CylindersHalder 15.11.2022

EH 1149. - Positioning Clamping Bars, twin faced

EH 1149. - Positioning Clamping Bars, twin facedHalder 15.11.2022

EH 1104. - Supporting Plates including accessories

EH 1104. - Supporting Plates including accessoriesHalder 15.11.2022

EH 1105. - Clamping Angles

EH 1105. - Clamping AnglesHalder 15.11.2022

EH 22620. - Hard Metal Inserts / with tip

EH 22620. - Hard Metal Inserts / with tipHalder 22.12.2022

EH 1021. - Thrust Angles

EH 1021. - Thrust AnglesHalder 15.11.2022

HCS HRG 4 - HALFEN Sliding support HCS HRG 4

HCS HRG 4 - HALFEN Sliding support HCS HRG 4Halfen 02.08.2021